The professional ELAN SUPERSONIC 2.0 system is designed for effective and safe flexing procedures — a modern alternative to eyebrow and eyelash lamination. The formula gently acts on the hairs, helping to give them the desired shape, curl and natural shine without damaging their structure.

The ELAN SUPERSONIC 2.0 set includes:
Serum 1 CLEAR (10 ml) — softens the hairs, preparing them for shaping.
Serum 2 (10 ml) — fixes the new shape and direction of hair growth.
Multivitamin (10 ml) — completes the procedure, restoring balance, nourishing and strengthening the hairs.

The three products in the system work together to provide long-lasting, lasting results.
ELAN SUPERSONIC 2.0 is intended for professional use only.

Shelf life: 24 months.
Shelf life after opening: 6 months.

Step-by-step eyebrow flexing procedure
1. Diagnosis
Before the procedure, assess the condition of the hairs and determine the exposure time:
Group 1 — stiff, thick, uncoloured hairs:
Serum 1 — 5–8 minutes, Serum 2 — 6–8 minutes.
Group 2 — natural or chemically treated hairs of medium thickness:
Serum 1 — 3–5 minutes, Serum 2 — 6–8 minutes.
Multivitor is applied for 5 minutes regardless of hair type.
The maximum exposure time for Serums 1 and 2 is 15 minutes.
The temperature in the room affects the speed of the reaction — the warmer it is, the more active the product is.
2. Preparation
Clean the eyebrows and skin with ÉLAN DETOX-MOUSSE 2.0, then rinse off any residue with water.
3. Shaping (Serum 1)
For clients with sensitive skin, apply TM ÉLAN professional line argan oil cream: a thin layer on the eyebrows and a thick layer around them.
Apply Serum 1 evenly and leave on for 3–8 minutes. Rinse off with a cotton pad moistened with water. When shaping, take into account the direction of hair growth to avoid kinks.
4. Fixing the shape (Serum 2)
Apply Serum 2, styling the hairs in the desired direction. Leave on for 6–8 minutes (the time is equal to or slightly longer than the previous step).
Rinse off any residue with water if you plan to dye your eyebrows, or with ÉLAN DETOX-MOUSSE 2.0 if you do not.
5. Care and restoration (Multivitor)
Apply Multivitor to the hairs for 5 minutes. Rinse with water or, if further dyeing is required, use ÉLAN DETOX-MOUSSE 2.0 to complete the reaction.
Dye your hair, then apply COLOUR FIX 2.0 to lock in the colour.
It is recommended to correct your eyebrows after the procedure — use tweezers for the most gentle result.

Eyelash flexing procedure
1. Diagnosis:
Coarse or straight eyelashes — Serum 1: 6–10 minutes, Serum 2: at least 6 minutes.
Thin or medium thickness — Serum 1: 3–6 minutes, Serum 2: at least 6 minutes.
The exposure time for Multivitor is 5 minutes for all hair groups.
2. Preparation:
Clean the eyelashes with ÉLAN DETOX-MOUSSE 2.0, rinse with water.
Fix the silicone roller of the required size.
Distribute and attach the eyelashes to the roller using TM ÉLAN laminating gel.
3. Curling (Serum 1):
Apply the product to the middle of the lashes. Leave on for 3–10 minutes and remove any residue with a dry brush.
4. Setting the shape (Serum 2):
Apply a thick layer and leave on for 6–10 minutes. Remove any residue with a dry brush in the direction of eyelash growth.
5. Care (Multivitor):
Apply to the entire length of the eyelashes for 5 minutes. Remove any residue with a cotton pad moistened with water.
For a more pronounced effect, it is recommended to dye the eyelashes after the procedure.

Recommendations after the procedure
For 24 hours, avoid saunas, solariums, contact with water and mechanical pressure (sleeping face down on a pillow).
Do not use aggressive cosmetic products such as scrubs, peels, or alcohol-based lotions for 48 hours.
Do not dye your eyebrows with henna or lighten them, as this can damage the hair structure.

Contraindications
The procedure is not performed in the following cases:
- individual intolerance to the components;
- skin damage or rashes in the eyebrow and eye area;
- after solarium or laser procedures (less than 24 hours before the session).

Safety precautions
Before the procedure, do an allergy test — apply two drops of each serum to the crook of your elbow 48 hours before use.
Serum 1 contains thioglycolate.
Serum 2 contains hydrogen peroxide.
Avoid contact with eyes. Use protective gloves. Do not use metal instruments.
In case of irritation or allergy, consult a dermatologist.

Ingredients:
«SUPERSONIC 2.0» Serum 1 CLEAR: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, MINERAL OIL, ETHYLHEXYL STEARATE. CETRIMONIUM CHLORIDE, SODIUM SULFITE, SODIUM ERYTHORBATE, CETEARETH-20, DIAZOLIDINYL UREA (AND) METHYLPARABEN (AND) PROPYLPARABEN, PARFUM, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED COLLAGEN, HYDROLYZED KERATIN, DIMETHYLCYCLOHEXYL 3-BUTENYL KETONE, METHYL DECENOL, MICA (AND) CI 45410 (AND) LAUROYL LYSINE.

«SUPERSONIC 2.0» Serum 2: AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

«SUPERSONIC 2.0» Multivitor: AQUA, CETEARYL ALCOHOL, GLYCERIN, ISOPROPYL PALMITATE, PARAFFINUM LIQUIDUM, CYCLOPENTASILOXANE, BETAINE, HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, CETEARETH-20, PEG-8, PEG-8/SMDI COPOLYMER, SODIUM POLYACRYLATE, CETRIMONIUM CHLORIDE, DIMETHICONOL, BHT, PALMITOYL MYRISTYL SERINATE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, BENZYL SALICYLATE, HYDROXYCITRONELLAL, Cl 60730.