KiwiFix «glue without glue» fixing balm ensures that lashes are securely fixed to the pad, allowing you to maintain a clear layout throughout the entire procedure — without shifting, sticking or unwanted changes in shape.

Thanks to its light texture, KiwiFix does not dry out the hairs or form a thick film that could hinder the penetration of subsequent products. On the contrary, it preserves elasticity, promoting deeper penetration of the active components in lifting products and allowing you to achieve maximum effect.

Advantages of ELAN KiwiFix:
- Doesn’t dry out or form a thick film
- Ensures effective performance of lamination products
- Comfortable texture allows for quick and easy lash placement
- Lashes can be brushed through throughout the procedure
- Fast and precise placement
- Suitable for lashes of different densities
- Easily rinsed off

Recommendations for use: use protective gloves. For external use only. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. If an allergic reaction occurs, consult a dermatologist.
Storage conditions: store in a dry place out of reach of children at a temperature between +5°C and +25°C. Avoid direct sunlight.

Mode of application:
1. Clean the lashes with ÉLAN Detox-Mousse 2.0. Remove the foam with a cotton pad moistened with water.
IMPORTANT! If necessary, degrease the lashes with ÉLAN KERATIN CLEANER.
2. Apply a thin layer of fixing balm to the silicone pads and spread it evenly over their surface.
3. Place the lashes on the balm in the desired direction using a microbrush and applicator.
IMPORTANT! When working with stiff or unruly lashes, apply a thicker layer of balm, but avoid excess to prevent slowing down the action of the first component (Agent 1).
4. Remove any remaining Agent 1 first with a dry cotton swab, then with a swab moistened with water.
5. If necessary, re-lay out the lashes before applying the second component (Agent 2).
6. After applying the second component (Agent 2), compensate the lashes using a cotton pad or compensators.
7. After completing the procedure, remove any remaining balm with a damp cotton pad or cotton swab if necessary.

Chemical composition: AQUA, PVP, CETEARYL ALCOHOL, CETEARETH-25, GLYCERIN, PROPYLENE GLYCOL, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, SODIUM CHLORIDE, SODIUM SULFATE, PARFUM, CI 47005, CI 61570.